Da-Lite TENSIONED ADVANTAGE DELUXE ELECTROL Specification

S
UGGESTED SPECIFICATIONS:
Tensioned Advantage Deluxe screen shall have two motors, one to operate door and one to operate screen. Door motor electrically
operated 120 volt (60 Hz) 1.2 amp. Shall have specially designed motor mounted inside the roller, to be three wire with ground, quick
reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting.
To have pre-set but adjustable limit switches to automatically stop fabric door in the "up" and "down" positions. The roller to be of rigid
aluminum, 1-1/2" in diameter. Screen motor is electrically operated 120 volt (60 Hz) 1.4 amp. Shall have specially designed motor
mounted inside the roller with a noise silencer to be three wire quick reversal type, oiled for life, with automatic thermal overload
cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automatically
stop picture surface in the "up" and "down" positions. The roller to be of rigid metal, 3-3/16" in diameter. Screen fabric to be seamless,
flame retardant and mildew resistant vinyl, with Da-Mat, High Contrast Da-Mat, Audio Vision, High Contrast Audio Vision, Da-Tex (Rear),
Dual Vision, Cinema Vision, High Contrast Cinema Vision, High Contrast Cinema Perf or Pearlescent surface with black masking borders
standard. Each side of the fabric to have tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar
with added weight maintains vertical tension on the screen surface. Case shall be an aluminum extrusion. Bottom of case to be self-
trimming with a built-in flange around the bottom of the case. Case to be white. Steel brackets bolted to the ends of case for ceiling
mounting. A section of the bottom of the case shall be an aluminum door equipped with hinges so that it opens and closes
automatically with the lowering and raising of the picture surface. The balance of the bottom of the case shall be a second hinged
aluminum door with manual opening to provide access. Hinges shall be mounted in a concealed way. Junction box shall be integrated
into the housing making it possible to install the housing and wire to the building's electrical system during construction. The junction
box shall contain a five prong connector that is mounted in the housing for easy plug-in connection to the motorized fabric and roller
assembly. The motorized fabric and roller assembly to be installed in the case at the factory or at a later time at the job site. To be
complete with three position control switch and cover plate. Suitable for use in environmental air space in accordance with section
300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen to be listed by Underwriters' Laboratories.
All viewing surfaces will be seamless.
All viewing surfaces are standard with black backing except Da-Tex and Dual Vision.
Audio Vision, High Contrast Audio Vision and High Contrast Cinema Perf available in sizes up to 87" x 116" in Video Format and 78" x 139" in HDTV
Format.
Viewing Area
H x W Cm
43" x 57" 109 x 145
50" x 67" 127 x 170
60" x 80" 152 x 203
69" x 92" 175 x 234
87" x 116" 221 x 295
108" x 144" 274 x 366
120" x 160" 305 x 406
Viewing Area
H x W Cm
45" x 80" 114 x 203
52" x 92" 132 x 234
54" x 96" 137 x 244
58" x 104" 147 x 264
65" x 116" 165 x 295
78" x 139" 198 x 353
Viewing Area
H x W
50" x 50" 127 x 127
60" x 60" 152 x 152
70" x 70" 178 x 178
84" x 84" 213 x 213
6' x 8' 183 x 244
8' x 8' 244 x 244
7' x 9' 213 x 274
9' x 9' 274 x 274
8' x 10' 244 x 305
10' x 10' 305 x 305
9' x 12' 274 x 366
All screens standard with 12" black drop at top.
Extra drop may alter case dimensions. Contact Da-Lite for details.
Overall case length dimensions ±1/4".
TENSIONED ADVANTAGE
DELUXE ELECTROL
Automatic Electric Projection Screen
SPECIFICATION DATA
projection screen(s),
VIDEO FORMAT DIMENSIONS
Nominal Diagonal
In.
72"
84"
100"
120"
150"
180"
200"
HDTV FORMAT DIMENSIONS
Nominal Diagonal
In.
92"
106"
110"
119"
133"
159"
SQUARE FORMAT DIMENSIONS
Overall Length of Case
Cm In.
73-1/4"
84-1/4"
95-3/4"
112-1/4"
122-1/4"
125-3/4"
136-1/4"
134-3/4"
149-3/4"
146-3/4"
170-3/4"
®
Overall Length of Case
Cm In.
183 79-1/4"
213 90-1/4"
254 104-1/4"
305 118-1/4"
381 145-1/4"
457 170-1/4"
508 187-1/4"
Overall Length of Case
Cm In.
234 102-3/4"
269 115-1/4"
279 119-3/4"
302 128-1/4"
338 141-1/4"
404 166-1/4"
Cm
186
214
243
288
311
319
346
342
380
373
434
Detail dimensional drawings, wiring diagrams and installation instructions
available upon request.
Specifications subject to change without notice.
Letterbox formats and custom sizes available upon request.
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
www.da-lite.com
e-mail: info@da-lite.com
(H) x (W), size. The
Approx. Ship. Wt.
Cm Lbs.
201 102
229 114
265 125
300 148
369 170
432 189
476 203
Approx. Ship. Wt.
Cm Lbs.
261 125
293 140
304 145
326 150
359 163
422 188
Approx. Ship. Wt.
Lbs.
93
104
116
125
140
148
155
159
165
168
189
C
Kg
46.3
51.7
56.7
67.1
77.1
85.7
92.1
Kg
56.7
63.5
65.8
68.0
73.9
85.3
Kg
42.2
47.2
52.6
56.7
63.5
67.1
70.3
72.1
74.8
76.2
85.7