Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Da-Lite Tensioned Conference Electrol
Summary of Contents for Da-Lite Tensioned Conference Electrol
- Page 1 INSTRUCTION BOOK FOR Tensioned Conference Electrol...
-
Page 2: Important Safety Instructions
Pre-Installation Important Safety Instructions When using your video equipment, basic safety precautions Carefully unpack screen and remove outer wrapping from case. should always be followed, including the following: 2. Make sure to recheck measurements of screen location before installation. Read and understand all instructions before using. 2. - Page 3 Installation (continued 6. Remove shipping brackets by removing the hex head screws from aluminum slat and case. Slat should move freely (Figure 2). (Only if the roller assembly is pre installed.) 7. Test installation by operating the screen several times. Be prepared to stop the screen.
-
Page 4: Camera Installation
Camera Installation NOTE: Unit is to be used with a camera weighing no more than 8 pounds. Camera and camera cables NOT included. Run the camera arm down and then disconnect the power to 3. Connect camera to the cable(s) and secure the camera to the the unit. -
Page 5: 120V Wiring Diagram
120V Wiring Diagram NOTE: 20-24AWG wire recommended for dry contact wiring. RJ-14 cable RJ-14 cable SCREEN (supplied) (pre-installed) CAMERA SCREEN CAMERA Down Common STOP Camera Arm Motor Back of Wall Keypad Front of Wall Keypad RJ-45 Dry Contacts Dry Contacts for Receptacle for Camera Camera Arm... -
Page 6: 220V Wiring Diagram
220V Wiring Diagram NOTE: 20-24AWG wire recommended for dry contact wiring. RJ-14 cable (supplied) Splitter QAUX QEYE SCREEN CAMERA Screen Motor SCREEN QEYE QEYE CAMERA STOP Black (Up) Brown (Down) Dry Contacts Blue (Common) for Camera Arm Front of Wall Keypad Back of Wall Keypad White (Common) Green/Yellow (Ground... -
Page 7: Screen Adjustment
Screen Adjustment CONTACT DA-LITE AT 800-622-3737 OR 574-267-8101 IF SCREEN, DOOR MOTOR NEEDS ADJUSTMENT. Troubleshooting Visit www.da -lite.com/products/tutorials.php to find installation You can contact us by email at info@da-lite.com or by phone at and troubleshooting tutorials. You will also find a link to Live Chat 800.622.3737 or 574.267.8101 with any additional troubleshooting... - Page 8 INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137, Warsaw, IN 46581-0137, (574) 267-8101, (800) 622-3737.
Need help?
Do you have a question about the Tensioned Conference Electrol and is the answer not in the manual?
Questions and answers