Basic operations
2
Select the Basic screen settings.
–
Color: Select whether the document will be copied in color or in black and white. As a factory default,
"Auto Color", is selected.
–
Paper: Select the paper tray that is to be used. As a factory default, "Auto" is selected.
–
Zoom: For enlarged/reduced copying, change the zoom ratio. As a factory default,"100%"(Full Size) is
selected.
–
Duplex/Combine: Change the setting when copying double-sided documents or making double-sided
copies of single-sided documents. In addition, multiple document pages can be combined into a single
printed page. As a factory default,"1-sided>1-sided" is selected.
–
Finishing: The printed pages can be sorted by pages or by copies. In addition, the pages can be stapled
or holes can be punched in them.
–
Separate Scan: Select this setting to scan a document in different batches. A document scanned in
different batches can be treated as a single copy job.
–
Auto Rotate OFF: Select this setting to print copies with the image not rotated to fit the orientation of
the loaded paper.
–
For details, refer to chapter 2, "Basic copy operations", of the User's Guide [Copy Operations].
3
Type in the desired number of copies.
–
To change the number of copies, press the [C] (clear) key, and then type in the desired number.
cm5520
1
1-3