Oce cm5520 Quick Manual page 32

– Press [↑] and [↓] until the desired paper type appears.
– If label sheets are loaded, select "Thick 1".
– If non-standard-size paper is loaded, specify the Paper Size setting.
– For details on specifying the paper size and paper type settings, refer to chapter 6, "Copy paper/original
documents", of the User's Guide [Copy Operations].
– Printing on OHP transparencies is possible only in black.
!
Detail
Paper of the following types and amounts can be loaded into the bypass tray.
Plain paper (64 g/m
Thick paper 1 (91 g/m
Thick paper 1+ (121 g/m
Thick paper 2 (158 g/m
Thick paper 3 (210 g/m
Thick paper 4 (257 g/m
OHP transparencies:
Envelopes:
Label sheets:
Paper of the following sizes can be specified for the bypass tray.
Standard-sized paper:
Non-standard-sized paper:
*1 There are five Foolscap sizes: 220 × 330 mm
one of these sizes can be selected. For details, contact your service representative.
Note
For details, refer to chapter 1, "Before making copies", of the User's Guide [Copy Operations].
cm5520
2 2
to 90 g/m ): Up to 150 sheets
2 2
to 120 g/m ): Up to 100 sheets
2 2
to 157 g/m ): Up to 80 sheets
2 2
to 209 g/m ) Up to 70 sheets
2 2
to 256 g/m ): Up to 60 sheets
2 2
to 300 g/m ): Up to 50 sheets
Up to 20 sheets
Up to 10
Up to 50 sheets
A3
5-1/2 × 8-1/2
Width: 90.0 mm to 311.1 mm; Length: 139.7 mm to 457.2 mm
w
w w w
to B6 , A6 , 12-1/4 × 18
w v
/ , 8 × 13
w w
, 8-1/2 × 13 , 8-1/4 × 13
w w
, 12 × 18
*1
w w v w
, 16K / , 8K
w
, 8-1/8 × 13-1/4 and 8 × 13
to
w
. Any
x-31