Oce cm5520 Quick Manual page 50

No. Part Name
9 Finisher 9834
10 Punch kit CM5520010
11 Post inserter 9835
12 Output tray CM5520050
13 Video interface kit CM5520070*
14 Fax kit CM3500210*
15 Stamp unit*
16 Scan accelerator kit CM5520060*
17 Security kit CM3500260*
18 Local interface kit CM5520080*
Parts marked with an asterisk (*) are internal options and therefore are not shown in the illustration.
Note
For details, refer to chapter 1, "Before making copies", of the User's Guide [Copy Operations].
cm5520
Description
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by page), Staple settings ("Corner" and "2
Positions"), "Half-Fold", "Center Staple & Fold", and "Tri-fold" are available.
Installed onto the finisher to allow hole punching to be used.
Adds cover pages to copies when installed on the finisher. In addition, this
option allows the finisher to be operated manually.
Collects printed pages.
Used for connecting the image controller 9839 to this machine.
Allows this machine to be used as a fax machine.
Applies a stamp to documents that have been scanned.
Creates images at high speed when sending scans.
Installed to encode the data saved on the hard disk so that the hard disk can
be used more safely.
Used for connecting the authentication unit (biometric type), the authentication
unit (IC card type) and the JScribe IC card reader/writer.
x-49