Oce cm5520 Quick Manual page 24

No. Part Name
10 [Start] key
11 Data indicator
12 [C] (clear) key
13 Keypad
14 [Help] key
15 [Enlarge Display] key
16 [Accessibility] key
17 [Power Save] key
18 [Access] key
19 [Brightness] dial
20 [User Box] key
21 [Fax/Scan] key
22 [Copy] key
Note
For details, refer to chapter 1, "Before making copies", of the User's Guide [Copy Operations].
cm5520
Description
Press to start an operation. When this machine is ready to begin an operation,
the indicator on the [Start] key lights up in blue. While a document is being
scanned or when a job is temporarily stopped, the indicator on the [Start] key
lights up in orange.
Flashes in blue while a print job is being received. Lights up in blue when a print
job is queued to be printed or while it is being printed. Lights up in blue when
there is saved fax data or unprinted fax data.
Press to clear a value (such as the number of copies, a zoom ratio, or a size)
entered using the keypad.
Use to type in the number of copies, zoom ratio, fax number and various other
settings.
Press to display the Help Menu screen, which can be used to display
descriptions of the various functions and details of operations.
Press to enter Enlarge Display mode.
Press to display the screen for specifying settings for user accessibility
functions.
Press to enter Power Save mode. While the machine is in Power Save mode,
the indicator on the [Power Save] key lights up in green and the touch panel
goes off. To cancel Power Save mode, press the [Power Save] key again.
If user authentication or account track settings have been applied, press the
[Access] key after entering the user name and password (for user
authentication) or the account name and password (for account track) in order
to use this machine.
Use to adjust the brightness of the touch panel.
Press to enter User Box mode. While the machine is in User Box mode, the
indicator on the [User Box] key lights up in green.
Press to enter Fax/Scan mode. While the machine is in Fax/Scan mode, the
indicator on the [Fax/Scan] key lights up in green.
Press to enter Copy mode. (As a default, the machine is in Copy mode.) While
the machine is in Copy mode, the indicator on the key lights up in green.
x-23