Miscellaneous Control - JETWAY Kocab 18G User Manual

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at next Boot is
CPU Vcore Select
CPU Ratio Select
Core_VDD Select
VDD_AUXC Select
VAGP Output
VRAM Output
VAUX Output
VTT Voltage
VAGP LUV Protect
VRAM LUV Protect
Dual3.3V LUV Protect
Flash Parts Write Protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz, 133MHz, 166MHz, 200MHz, 236MHz, 240MHz, 242MHz, 244MHz,
245MHz, 250MHz
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz, 110MHz, 125MHz, 133MHz, 138MHz, 166MHz, 200MHz, 208MHz,
221MHz, 249MHz
CPU Vcore Select
This item allows you to select Vcore of the CPU. The choice are: +1.100V∼+1.850V.
CPU Ratio Select
This item allows you to select Ratio of the CPU. The choice are:X5~X24
VDD AUXC Select
This item allows you to select Chip Voltage. The choice are 1.6V(Default), 1.7V
VAGP Output
This item allows you to select 1.5V of the AGP 4X VGA card. The choice are: 1.5V, 1.6V,1.7V
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V~ 3.0V.
VAUX Output
This item allows you to select AUX voltage. The choice are: Default, 2%, 4%, 8%,12%, 16%.
VTT Voltage
This item allows you to select VTT voltage. The choice are: 1.25V, VDIMM/2.
VAGP/VRAM LUV Protect
This item allows you enabled the protect function on motherboard when over current. The choice are:
Enabled(Default), Disabled
Flash Part Write Protect
This item allows you protect BIOS prevent the data destroy by virus. The choice are: Enabled,
Disabled. Before flash BIOS you have to change the setting to Disabled otherwise it can not flash
BIOS.
Miscellaneous Control
100MHz
133MHz
Default
Default
1.7V(Default)
1.6V(Default)
1.5V(Default)
2.6V(Default)
Default
1.25V
Enabled
Enabled
Disabled
Enabled
F6:Optimized Defaults
34
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults