Table of Contents
Advertisement
memory size of 3.0GB DDR SDRAM. For Support 128-bit data transfer function (Dual
Channel) must plug both DDR1 & DDR3, DDR2 & DDR3, or DDR1 & DDR2 & DDR3,
other combination only support 64-bit data transfer.
Valid Memory Configurations
Bank
Bank 0, 1 (DDR1)
Bank 2, 3 (DDR2)
Bank 4, 5 (DDR3)
Total
NOTE! Make sure the total installed memory does not exceeds 3.0GB, otherwise the
system may hang during startup.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING! For the DDR SDRAM CLOCK is set at 166MHz, use only DDR333 compliant DDR
Modules. When this motherboard operate at 133Mhz, most system will not even
boot if non-compliant modules are used because of the strict timing issues, if your
DDR Modules are not DDR266-compliant, set the DDR SDRAM clock to 100MHz
to ensure system stability.
2-5 Expansion Cards
WARNING! Turn off your power when adding or removing expansion cards or other system
components. Failure to do so may cause severe damage to both your motherboard
and expansion cards.
2-5-1 Procedure For Expansion Card Installation
1. Read the documentation for your expansion card and make any necessary hardware or
software setting for your expansion card such as jumpers.
2. Remove your computer's cover and the bracket plate on the slot you intend to use.
184-Pin DIMM
DDR 266/333/400 DDR SDRAM
DDR 266/333/400 DDR SDRAM
DDR 266/333/400 DDR SDRAM
System Memory (Max. 3.0GB)
DDR 266/333/400
Dual Channel (DDR1 & DDR3)
Dual Channel (DDR2 & DDR3)
Dual Channel (DDR & DDR2 & DDR3)
DDR SDRAM module looks like.
11
PCS
Total Memory
X1
64MB∼1.0GB
X1
64MB∼1.0GB
X1
64MB∼1.0GB
3
64MB∼3.0GB
Figure 2-4
Advertisement
Table of Contents
