4.
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU33120
Procedure for tilting down (power
trim and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
" (down) to retract the
ZMU01884
ZMU01885
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
DN
"
DN
EMU28060
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU32850
Power trim and tilt models
The outboard motor can be tilted up partially
Operation
UP
DN
ZMU01936
ZMU04603
"
ZMU01979
57