Water Separator-Warning Indicator Blinks While Cruising - Yamaha LZ300 Owner's Manual

Hide thumbs Also See for LZ300:
Table of Contents

Advertisement

Trouble Recovery
EMU31781
Water separator-warning indicator
blinks while cruising
EWM01500
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot
G
or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep
G
away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to
G
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled
G
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-warning indicator on
the Command Link tachometer blinks, per-
form the following procedure.
1. Water separator-warning indicator
1.
Stop the engine.
2.
Remove the top cowling.
3.
Disconnect the water detection switch
84
coupler.
ECM01570
CAUTION:
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
1
1. Water detection switch coupler
4.
Unscrew the filter cup from the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
1
2
1. Filter cup
2. Water detection switch lead
5.
Drain the water in the filter cup by soak-
ing it up with a rag.
ZMU05502
ZMU05501

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z300

Table of Contents