Fuel Consumption Meter; Fuel Economy - Yamaha LZ300 Owner's Manual

Basic components
displays " " (for port and starboard).
Use the " " (set) button to rotate the fuel
flow display in the following order:
Press the " " (set) button once to display
G
the fuel flow of the starboard engine. An
" " (for starboard) will also be displayed.
Press the " " (set) button a second time
G
to display the fuel flow of the port engine.
A " " (for port) will also be displayed.
Press the " " (set) button a third time to
G
return the display to the total fuel flow of
both engines. "
will also be displayed to indicate both the
port and starboard engines.
NOTE:
The fuel flow meter displays gallons/hour
G
or liters/hour according to operator prefer-
ence. Select the desired units of measure-
ment by setting the selector switch on the
back of the gauge during installation.
1. Selector switch
30
ZMU01749
" (for port and starboard)
The fuel consumption meter and fuel
G
economy meter will indicate the same unit
of measurement.
EMU26760

Fuel consumption meter

This gauge displays the total amount of fuel
consumed since the gauge was last reset.
Press the " " (mode) button repeatedly
until the indicator on the face of the gauge
points to total "
fuel consumption to zero, press the "
(set) and " " (mode) buttons at the same
time.
EMU26770

Fuel economy

This gauge displays the distance per liter or
gallon when cruising, and is only for refer-
ence use by the operator.
Press the " " (mode) button repeatedly
until the indicator on the face of the gauge
points to " " (economy).
" (total). To reset the total
ZMU01751
ZMU01752
"