Table of Contents
Advertisement
3
6
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection warning indicator
5. Engine trouble warning/maintenance indica-
tor
6. Cooling water pressure
7. Oil level (2-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
NOTE:
The tachometer unit shows various kinds of
information according to the setting made
using the "
" (set) and "
tons. For details, see the attached operation
manual.
Preoperation checks
Place the remote control lever in neutral and
turn the main switch to "
displays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the wa-
ter separator-warning indicator blinks, con-
sult your Yamaha dealer immediately.
NOTE:
To stop the buzzer, press the "
"
" (mode) button.
Oil level warning
When the oil level is low while cruising, the
oil level-warning indicator will start to blink.
1
4 5 2
7
8
9
ZMU05453
" (mode) but-
" (on). After all the
" (set) or
Basic components
The engine speed will automatically de-
crease to about 2000 r/min.
When the buzzer sounds and the oil level-
warning indicator blinks, check the oil level
and add the oil if necessary. If the warning
device has activated while the appropriate
engine oil level is maintained, consult your
Yamaha dealer.
ECM01580
CAUTION:
Do not continue to run the engine if the oil
level warning device has activated. Seri-
ous engine damage will occur.
Overheat warning
If the engine temperature rises too high while
cruising, the overheat-warning indicator will
start to blink. The engine speed will automat-
ically decrease to about 2000 r/min.
ZMU05419
ZMU05420
33
Advertisement
Table of Contents
