Table of Contents
Advertisement
blink.
ECM00880
CAUTION:
Do not continue to operate the engine
with full throttle if a warning device has
activated. Get back to the port within troll-
ing engine speed.
1. Fuel level warning segment
EMU26731
Low battery voltage-warning
indicator
If battery voltage drops, the display will auto-
matically turn on and begin to blink.
ECM00870
CAUTION:
Get back to the port soon if a warning de-
vice has activated. For charging the bat-
tery, consult your Yamaha dealer.
1. Low battery indicator
Basic components
EMU26740
Fuel management meter
The fuel management meter shows the state
of the fuel consumption while the engine is
running.
1
3
1. Fuel flow meter
2. Fuel consumption meter / Fuel economy
meter / Twin engine speed synchronizer
3. Water separator-warning indicator (operates
only if the sensor has been installed)
NOTE:
After the main switch is first turned on, all
segments of the display come on as a test.
After a few seconds, the gauge will change
to normal operation. Watch the gauge when
turning on the main switch to make sure all
segments come on.
EMU26751
Fuel flow meter
The fuel flow meter displays the amount of
fuel flow over a one-hour period, at the cur-
rent rate of engine operation.
Fuel flow readings are not accurate when the
engine is operating under about 1300 r/min.
As the fuel pump cycles on and off, the dis-
play indicates either no fuel flow or higher
flow than the actual average use.
If twin engines are installed on your boat, the
fuel flow meter displays the total fuel flow of
both the port and starboard engines. It also
2
ZMU01748
29
Advertisement
Table of Contents
