Ultra Start 3295Series Installation Manual page 19

PAGE 19
PROGRAM MODE
SYSTEM PROGRAMMING - Menu 1
ENTERING PROGRAM MODE 2
IGNITION KEY
ON/OFF - ON/OFF - ON
(Leaving the key ON)
SETTING 1- VALET SETTINGS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
CHANGE SETTING 1 -
GOTO SETTING 2 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
SETTING 2-PARK LIGHT OUTPUTS
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
CHANGE SETTING 2 -
GOTO SETTING 3 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
SETTING 3-HORN OUTPUT
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
CHANGE SETTING 3 -
GOTO SETTING 4 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
CON'T ON NEXT PAGE
PROGRAM SWITCH
Press and release 1 time
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – SECURE- The LED/ Program Switch must be held for 15 seconds
to place the system into Valet Mode.
SETS OPTION 2 – STANDARD- The LED/ Program Switch must be held for 5
seconds to place the system into Valet Mode. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – 30 SECOND- The park light output will flash for all functions and
will stay active for 30 seconds when unlock is pressed.
SETS OPTION 2 – NORMAL OPERATION- The park lights will flash for all
functions. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – SHORT OUTPUT- The HORN output will activate for 5ms when a
function is preformed.
SETS OPTION 2 – LONG OUTPUT- The HORN output will activate for 50ms when a
function is preformed.
SETS OPTION 3 – NORMAL OUTPUT- The HORN output will activate for 10ms
when a function is preformed. (DEFAULT)
SYSTEM PROGRAMMING - Menu 1
SIREN CHIRP
1 CHIRP
Confirming
Program Mode
PRESS
1 CHIRP
1 TIME
PRESS
2 CHIRP
1 TIME
PRESS
3 CHIRP
1 TIME
95 SERIES
INSTALL MANUAL
REMOTE BUTTON
Press UNLOCK
Button to
Select Menu 2
1X
2X
3X