Technical Data - AEG PROTECT A. 500 Operating Instructions Manual

3.4

Technical Data

Type rating
PROTECT A. 500
PROTECT A. 700
UPS input
Nominal connection voltage
Voltage range without battery
Frequency (automatic detection)
Connection
UPS output
Rated output voltage /
AVR technology
Rated output voltage in
battery operation
Frequency in battery operation
Nominal output current
Changeover time
in the event of a mains failure
Type of voltage
Connection
Protection against over-
temperature and short circuit
Battery
Autonomy time at nominal load
Exhaustive discharge protection/
protection against excess load
500 VA / 300 W
700 VA / 420 W
220 / 230 / 240 Vac
170 Vac to 280 Vac
50 / 60 Hz
Non-heating appliance
connector IEC 320 C 14
230 Vac
±10 %
50 Hz / 60 Hz ±1 Hz
2.2 A ( PROTECT A. 500 )
3.0 A ( PROTECT A. 700 )
2-6 ms (typical)
approximated sine
4 non-heating appliance
connectors IEC 320 C 13
with overvoltage protection,
3 with UPS back-up
yes
2 min
yes
15