Table of Contents
Advertisement
5
Installation and Operation
5.1
Check
Remove the UPS from its transport packaging and check that
it has not been damaged in transit. If you find any damage,
pack the unit up again and send it back to where you
purchased it.
5.2
Installation
Install the UPS unit in a protected location where there is an
adequate air supply and where it will be largely free from dust
build-up, corrosive vapours and electrically conductive
contamination.
Do not operate your UPS where it is exposed to high ambient
temperatures or atmospheric humidity. Set up the UPS at
least 20 cm away from the monitor in order to avoid
interference.
20
Hide quick links:
Advertisement
Table of Contents
