Connecting External Consumer Devices - Creative Sound Blaster Audigy SB1394 User Manual

Connecting
External
Consumer
Devices
Dolby Digital Decoder/
Amplifier
3.5 mm (mono)-
to-RCA cable
Dolby Digital (AC-3)
SPDIF In
Discrete 6-channel
Amplifier
3.5mm (stereo)-to-
RCA cable
Analog Front,
Rear and
Center/ Sub
Inputs
Figure 1-11:Connecting external consumer devices to the Sound Blaster Audigy (SB1394) card.
Analog/Digital
Out connector
Line Out
Rear Out
Sound Blaster Audigy (SB1394) card
Tip : Left / Center channel
Ring : Right / Subwoofer channel
Additional information:
For connection to Center and Subwoofer
channels using a 3.5mm (stereo)-to-RCA cable,
connect the white RCA connector to the Center
input and the red RCA connector to the
Subwoofer input of the amplifier.
Installing Hardware 1-13