Stopping Your Dryer; Fabric Softener Sheets - Fisher & Paykel DE60FA2 Installation Instructions And User Manual

Using Your Dryer
7. Beginning Drying Cycle
Once you have chosen all your desired settings, close the dryer door and press
the right-hand side of the control panel).
Opening the door during the operation will stop the dryer.
To restart the dryer, close the door and select

8. Stopping Your Dryer

Your dryer can be stopped during any stage of the drying process, to allow you to check on your
load or add/remove clothes.
To do this, open the dryer door. There will be a slight delay as the drum slows down and stops.
Note:
If the cycle is interrupted before it progresses into
To start your dryer again, press
9. Changing Cycles During Operation
If you wish to change the drying cycle you have chosen after the machine has already begun
drying, press your new cycle selection on the control panel.

10. Fabric Softener Sheets

If you want to use fabric softener sheets, you must ensure that they are labelled "dryer safe".
Always follow the instructions on the packaging. Do not place them in a dryer with warm clothes
as there is a chance the fabric softener may stain clothes. Only use a softener sheet once, then
discard it.
11. Beeps
At the end of the cycle, the dryer will beep to let you know that the load is finished. The drum
will automatically come to rest, allowing you to open the door and remove your load.
START to complete the cycle.
COOL DOWN , parts of the drum may be hot.
START .
START (located on
37
US
CA