Pre-Installation Guidelines; Avoiding General Rack Mounting Problems - Tripp Lite 0SU52091 User Manual

Owner's manual for 0su52091/en kvm switch 933199

Hide thumbs Also See for 0SU52091:

Table of Contents

Flat screws x 6 (for rail mount to console body)

Screws x 6

Bracket A with thumbscrew x 2

Screws x4

Keys x 2.

3.2 Pre-installation guidelines



Switch off all computers



Place cables away from fluorescent lights, air conditioners, and machines that are

likely to generate electrical noise



Ensure that the maximum distance between each computer and the SmartRack

116 does not exceed 30m/100ft

Elevated operating ambient temperature

The operating ambient temperature of the rack environment may be greater than the

room ambient when installing into a closed or multi-unit rack assembly. So install the

equipment in an environment compatible with the maximum rated ambient

temperature.

Reduced airflow

Install the equipment in a rack in such a way that the amount of airflow required for

safe operation is not compromised.

Mechanical loading

Mount the equipment in the rack in such a way that a hazardous condition is not

achieved due to uneven mechanical loading.

Circuit overloading

When connecting the equipment to the supply circuit, consider the effect that

overloading of circuits might have on over-current protection and supply wiring.

USER GUIDE

Table of Contents

Smartrack 116