Keyboard (Kb); Hkey) Hotkey - Cascading - Tripp Lite 0SU52091 User Manual

To erase a character:
Select it and press the Spacebar. Blank spaces remain in place of the erased character.
To erase an entire line:
Place the cursor at the beginning of the line. Keep the Spacebar depressed until the
line is erased.

5.2.6.2 Keyboard (KB)

The system operates with Windows, Linux, HP UX, Alpha UNIX SGI, DOS, Novell,
MAC-USB or Open VMS.
By default the keyboard mode is set to PS which is suitable for Intel based computers
and UNIX servers connected to ROC/RICCs USB.
For systems with UNIX servers connected to ROC/RICCs PS/2 set the KB column as
follows:

U1 for HP UX

U2 for Alpha UNIX, SGI, Open VMS

U3 for IBM AIX
To change the setting:
1. On the desired line, press Tab to jump to the KB column.
2. Toggle between the options using the Space bar.

5.2.6.3 (HKEY) hotkey - Cascading

When there are cascaded switches, and the lower level Switch has had its OSD
display hotkey changed, you must do the following:
Adjust the HKEY setting in the Ports Settings window of the higher level switch to
reflect the lower level switch's new hotkey.
To reflect the new hotkey:
1. On the line to which the Switch is connected, press Tab to jump to the HKEY
column.
2. Toggle between the options using the Spacebar.
3. Return to the Settings window by pressing Esc.
USER GUIDE
22