Screws x4
Keys x 2.
2.2 Pre-installation guidelines
Switch off all computers
Place cables away from fluorescent lights, air conditioners, and machines that are
likely to generate electrical noise
Ensure that the maximum distance between each computer and the SmartRack
116 does not exceed 30m/100ft
2.3 Connecting to a rack
Note! For increased rack depth of between 800 ~ 990mm, first change the
bracket to the medium or long bracket, see section 2.4 on page 6.
Note! The illustrations below show the connections to one side of the SmartRack 116.
The connections are the same for the other side.
1. Move the rail until two screws appear, see Figure 1.
2. Loosen slightly the 7 screws as shown below.
SMARTRACK 116 SWITCH
Figure 1 Exposing the 2 screws
Figure 2 Loosen 7 screws
3