SMARTRACK 116 SWITCH
Figure 7 Rail–lock switch
9. Connect three flat screws to the rear of the console on both sides. See figure below.
Figure 8 Connecting three flat screws to the rear of the console
The console now sits snugly in the rack, see Figure 9.
Figure 9 Console in the rack
3.5 Using the medium or longer bracket
For a rack depth of 800 ~ 905mm, use the medium bracket. For a rack depth of 905 ~
990mm, use the longer bracket.
To replace the bracket with the medium or longer bracket:
1. Loosen the 7 screws as shown below.
9