5.2.14.1 Updating the DDC information
Update the DDC information in any of the following circumstances:
When adding a new ROC to the system
When reconnecting an existing ROC that was temporarily used in a different
system
To update the DDC information, repeat the steps as set out above.
6 . U p gr a di n g t he S m a r t Ra c k 11 6 f i r mw a r e
With the Update software program you can upgrade the firmware for the:
OSD
Manager
ROCs
Update enables you to add new features and fix bugs in a quick and efficient manner.
Install the Update software on any computer, even one not part of the SmartRack 116
system.
The Update software and the latest firmware for your system are located on our
website
www.minicom.com
Upgrades page.
6.1 System requirements for the SmartRack 116 Update software
Pentium 166 or higher with 16 MB RAM and 10 MB free Hard Drive space.
Free Serial port.
Windows 98 and later.
6.2 Connecting the SmartRack 116 system
To update the firmware, the SmartRack 116 system must be connected and switched
on.
6.3 Installing the software
Download the Update software from
computer.
SMARTRACK 116 SWITCH
in the Support section on the Smart CAT5 Switch
www.minicom.com
27
and install it on your