5.2 Displaying the OSD
To display the OSD:
Press Shift twice. The OSD Main window appears. See Figure 24. Lines with blue
text show active computers. Lines with grey text show inactive computers.
The Type column indicates whether a computer "C" or another switch "S" is
connected to the port.
Port number
appears here
Instruction
keys
5.2.1 Navigating the OSD
To navigate up and down use the Up and Down arrow keys.
To jump from one column to the next (when relevant) use the Tab key.
To exit the OSD or return to a previous window within the OSD press Esc.
5.2.2 Selecting a computer
To select a computer:
1. Navigate to the desired computer line.
Or, type the port number of the desired computer.
2. Press Enter. The selected computer is accessed. A confirmation label appears
showing which computer is accessed.
Note! When the OSD is displayed you cannot select computers using the front panel
Select buttons or the keyboard hotkeys.
5.2.3 The OSD settings (F2)
Press F2. The OSD Settings window appears see Figure 25.
SMARTRACK 116 SWITCH
Figure 24 OSD Main window
17
C=computer
S=switch