Table of Contents
Advertisement
To change the Serial port setting:
1. Navigate to the Serial port line.
2. Toggle between the options using the Spacebar.
5.2.4.9 Changing the Keyboard language
In the OSD the names of the computers can be written in 3 different languages
English (EN), German (DE), and French (FR). The keyboard is preset to
can be changed as follows:
1. Navigate to the Keyboard language line.
2. Toggle between the options using the Spacebar.
5.2.4.10 Editing the Switch name
You can substitute up to 18 characters in the line. A space constitutes a character.
You can substitute up to 18 characters in the line. A space constitutes a character.
When there is more than one switch in the system give each Switch's OSD a different
When there is more than one switch in the system give each Switch's
name.
5.2.5 F7 Defaults
Press F7 to return the OSD to the factory default settings. Note! All changes made
will be removed.
5.2.6 The Ports settings
From the General Settings, return to the Settings window by pressing
the Ports line and press Enter. The Ports settings window appears see
5.2.6.1 Editing the computer name
In this window you can edit the computer names with up to 15 characters. When you
In this window you can edit the computer names with up to 15 characters.
have a cascaded CAT5 KVM Switch connected to a Computer port
ed CAT5 KVM Switch connected to a Computer port give the switch a
distinct name. See Figure 27.
SMARTRACK 116 SWITCH
be written in 3 different languages –
the factory default settings. Note! All changes made
. The Ports settings window appears see Figure 27.
Figure 27 Ports Settings window
21
The keyboard is preset to English; this
by pressing Esc. Navigate to
Advertisement
Table of Contents
