Manage The Adsl Settings - NETGEAR N150 D500 User Manual

Manage the ADSL Settings

NETGEAR recommends that you use the NETGEAR genie automatic setup utility to detect
the DSL connection and automatically set up the modem router (see
Router for DSL Service
If you are technically experienced and are sure of the correct DSL mode, multiplexing
method, and virtual circuit number for the virtual path identifier (VPI) and virtual channel
identifier (VCI), you can change those settings. NETGEAR recommends that you enter the
multiplexing method, VPI, and VCI only if your ISP gave you this information.

To view or change the DSL setup:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > ADSL Settings.
The xDSL Setup screen displays.
The selection from the Physical WAN Type menu is fixed at ADSL2+.
6. From the DSL Mode menu, select the DSL mode that your ISP provided you:
• Auto. The modem router detects the DSL mode automatically. This is the default
setting.
• ADSL (g.dmt). Legacy version of ADSL.
N150 and N300 WiFi DSL Modem Routers
on page 15).
Manage the WAN and LAN Network Settings
63
Set Up Your Modem