GE RADIANT PB975 Owner's Manual page 9

ge.com
WARNING ZONE
Using the Warming Zone (onsomemodels)
The WARMING ZONE is located
in the
back center of tile glass surtilce. _Mwa}_s
start with hot toad. Do not use to heat
cold food. Placing uncooked or cold food
oil tile WARMING ZONE could result in
toodborne illness.
To, use tile WARMING ZONE:
Turn tile WARMING ZONE knob to tile
setting you want fi'om HIto LO.
Food Type Control Setting
Sauces LO
Soups (cream) MED
Stews MED
Vegetables MED
Hot Beverages HI
Soups (other than cream) HI
Breads/Pastries LO
The chart above shows initial suggested settings only.
The temperature,type and amountoffoog type of pan
and flTetime held will affect flTequafity of flTefood.
To mrn off tile WARMING ZONE:
Turn tile WARMINGZONEknob to OFF.
CAUTION: Do not leave
food on the
WARMING ZONE for more than2 hours.
For best results, all fi)ods on tile
WARMING ZONEshould
be coxered with
a lid or aluminum foil.
Donot useplastic wrap to cover foo_ Plastic
may melt onto the surfaceand be very difficult
to dean.
_Mways use pot holders or (wen
mitts when removing fl)od fl'om tile
WARMINGZONE,
as cookware will be hot.
A HOrsudi_ce indicator light will glow
when the glass surtilce is hot and will
remain on until tile surli_ce is cool
enough to touch. I,ower settings may
not heat the glass surtime enough to
cause tile HOTsurli_ce indicator light
to
COille on.
Useonlycookware recommended for
top-of-range c ooking.
NOTE" TheWARMINGZONEwill notglow red
hkethecooking elements.