GE RADIANT PB975 Owner's Manual page 40

Before you call for service...
Troubleshooting -tips
Possible Causes What To Do
Clockandtimerdo
not work
Plug on range is not completely * Make sure electrical I)lu°_ is I_lugged,, into a lixe, properly
i]lserted in the electrical outlet, grounded outlet.
A fuse ha your home
* Replace
tile h/se or reset tile circuit breaker.
]nay be blown or the
circuit breaker tripped.
Oven controls improperly set. * See the Using the clock and timer section.
Oven will not seff-clean The oven temperature is * _Mlow the range to cool and reset the controls.
too high to set a self-clema
operation.
Oven controls improperly set. * See the Using the self-cleaning oven section.
The probe is plugged into * Remove the probe from the oven.
the outlet in the oven.
(on some models)
"Crackling" or This is the sound of the * This is normal.
"popping" sound metal heating and cooling
during both the cooking and
clemfing functions.
Excessive smoking Excessive soil. * Touch the CLEAR/OFF pad. Open the windows to
during a clean cycle rid the room of smoke. Wait until LOCKED goes off.
Wipe up the excess soil and reset the clean cycle.
Oven door will not Oven too hot. * Allow the oven to cool below hwkiug temperature.
open after a clean cycle
Oven not clean after a Oven controls not properly set. * See the Using the self-cleaning oven section.
clean cycle Oven was heavily soiled. * Clean up heavy spillovers beh>re starting the clean
cycle. Heavily soiled ovens may need to sell=clean
again or for a longer period of time.
"LOCKEO"flashes The self-clema cycle has been * Close the oven door.
io the display selected but the door is not
closed.
"LOCKED"is on The oven door is locked * Touch the CLEAR/OFFpad. Allow the oven to cool.
when you want because the temperature
to cook inside the oven has not
dropped below the
locking temperature.
"F--and a number
You have a function error code.
* Disconnect
all power to the range for at least 30
orletter.flash
seconds and then reconnect power. If the flu]ction
in the display
error code repeats, call for serxice.
4(?