GE RADIANT PB975 Owner's Manual page 34

Careand cleaningof the range.
s00k_t Oven Light Bulbs
i i i
Glasscover
NOTE"The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION. Before replacing your ./
oven light bulb, disconnect the electrical Receptacle
power to the range at the main fuse or
circuit breaker panel
Be sure to let the light coxer and bull)
cool completely.
For your satbb; do not touch a hot bull)
with bare hands or a damp cloth.
\
useglOVeS
or ClO[R
Toremove:
[] Tm'n the glass coxer
cotmterchx'kwise 1/4 mrn tmfil the
tabs of the glass cover clear the
grooves of the socket.
[] Using gloves or a (Ix'} cloth, remo;e
the bulb b) pulling it smfight (rot.
Toreplace:
[] Use a new 130-\olt halogen bulb,
not to exceed 50 watts.
[] Using gloxes or a dry cloth relno;e
tile bulb ti'om its packaging. Do not
touch the bulb with bare finge_s.
[] Push tile bull) straight into tile
receptacle all tile way:
[] Place the tabs of the glass coxer into
tile grooves of tile socket. Turn tile
glass cover clockwise 1/4 turn.
D)r improved lighting inside
tile oven, clean tile glass cover
fl'equenfly using a wet cloth. This
should be done when tile oven is
completely cool.
] Rec(mnect electrical power to
tile
o_,en.
Wipeup heavysoil on the oven
bottom.
Oven Heating Elements
Do not clean tile broil element. Am soil
will bm'n off when the element is heated.
Clean tile oxen floor with warm, soapy
wateI:
On somemodels, the bakeelement/s not
exposedand is under the ovenfloor If sp/llovers,
residueor ash accumulate on the oven floor,
wipe up before self-c/eanlbg.
34