I-5.
Product Label
The product label, which is located on the back of the smart plug switch,
displays the input/output power and the default password of your smart plug.
The password should be changed when you have finished the installation
process for security purposes. The password is required to access the smart
plug switch remotely.
I-6.
Reset
If you experience problems with your smart plug, you can reset the plug back
to its factory default settings. This resets all settings, including the smart
plug's password, back to default.
1.
Press and hold the reset button found on
the front of the plug for at least 10 seconds
2.
Release the button when the network LED
is flashing quickly red.
3.
Wait for the smart plug to restart. The
smart plug is ready when the network LED is
flashing slowly
mode.
red
to indicate installation
3