Edimax SP-1101W Quick Installation Manual
With edilife
Hide thumbs
Also See for SP-1101W:
- User manual (37 pages) ,
- Quick installation manual (24 pages) ,
- Quick installation manual (14 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Edimax SP-1101W
Summary of Contents for Edimax SP-1101W
- Page 1 SP-1101W / SP-2101W with EdiLife Quick Installation Guide 08-2018 / v1.0...
-
Page 2: Table Of Contents
CONTENTS Introduction ..................1 II Smart Plug Setup ................... 2 II-1 Package Contents ..................2 II-2 Hardware Installation ..................3 III EdiLife App Setup .................. 5 III-1 Apple iOS ....................... 6 III-2 Android OS ....................9 IV Resetting the Smart Plug ..............12... - Page 3 IMPORTANT SAFETY INFORMATION In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions: WARNING: There is risk of fire or electric shock if the device is used inappropriately. If you experience problems with the device, please contact your dealer of purchase for help.
-
Page 4: I Introduction
Introduction SP-1101W / SP-2101W is Wi-Fi smart plugs that are mostly managed by a powerful application tool from Edimax Technology. Once the smart plug is connected to the internet, the accompanying app can turn on/off the smart plug remotely. This quick installation guide will guide you through the steps required to setup... -
Page 5: Smart Plug Setup
Smart Plug Setup II-1 Package Contents SP-1101W / SP-2101W Quick Installation Guide CD with User Manual Front Panel 1. Switch Status Button 3. Power LED & LED 4. Network LED 2. Reset Button... -
Page 6: Hardware Installation
II-2 Hardware Installation Follow the instructions below to ensure your smart plug is properly connected and ready for setup. Please only set up one smart plug at a time. Plug the smart plug into a power socket. Press and hold the reset button (for ~10 seconds) on the plug until the network LED starts flashing quickly in and let go. - Page 7 Wait a few moments for the smart plug to start up. The smart plug is ready for setup when the network LED is flashing slowly in indicate installation mode. When smart plug is in installation mode, please continue to III EdiLife App Setup to set up your smart plug using the free EdiLife app.
-
Page 8: Edilife App Setup
EdiLife App Setup To allow remote access to your smart plug, please use the EdiLife app. After setup, you can use the EdiLife app to switch your smart plug on/off remotely from any compatible mobile device with an Internet connection. Please go to the setup instructions suitable for your mobile device (iOS or Android OS). -
Page 9: Iii-1 Apple Ios
III-1 Apple iOS For EdiLife app to control the Smart Plug, it must be connected to a Wi-Fi network with internet connectivity. To do so, follow the steps below: If you have not reset your smart plug, please do that now! Press and hold the Reset Button (for ~10 seconds) until the network LED starts flashing quickly in and let go. - Page 10 Open the EdiLife app and tap the icon (outlined in red) on the top-right corner of the screen. Enter a device name, password and confirm the password. For device name, enter a name where you will likely use the smart plug for. For example, office desktop light, bedside lamp, etc.
- Page 11 Enter the network’s password and press “OK” to continue. The app will connect the smart plug to the Wi-Fi router, please wait patiently. Congratulations! The smart plug is ready to be used. The smart plug’s network LED should be on in green color to indicate a successful network and cloud connection.
-
Page 12: Iii-2 Android Os
III-2 Android OS For the EdiLife app to control the Smart Plug, the smart plug must be connected to a Wi-Fi network with internet connectivity. To do so, follow the steps below: If you have not reset your smart plug, please do that now! Press and hold the Reset Button (for ~10 seconds) until the network LED starts flashing quickly in and let go. - Page 13 A message will be shown indicating that it is connecting to the smart plug. Enter a device name, password and confirm the password. For device name, enter a name where you will likely use the smart plug for. For example, office desktop light, bedside lamp, etc.
- Page 14 Enter the network’s password and press the icon to continue. The app will connect the smart plug to the Wi-Fi router, please wait patiently. Congratulations! The smart plug is ready to be used. The smart plug’s network LED should be on in green color to indicate a successful network and cloud connection.
-
Page 15: Resetting The Smart Plug
If you experience problems with your smart plug, or you want to connect the smart plug to a different Edimax app account, you can reset the plug back to its factory default settings. This resets all settings back to the default settings.
Need help?
Do you have a question about the SP-1101W and is the answer not in the manual?
Questions and answers