Watt-Hour Meter Clear/Actual Operation Hour Meter Clear (Pr. 170, Pr. 171); Input Terminal Function Selection (Pr. 180 To Pr. 186) - Mitsubishi FR-F500 Instruction Manual

Note: 1. Pr. 77, Pr. 160 and Pr. 991 values can always be read independently of the user group setting.
2. When Pr. 173 or Pr. 174 is read, the number of parameters registered to user group 1 appears.
When Pr. 175 or Pr. 176 is read, the number of parameters registered to user group 2 appears.
3. "0" set in the second digit of the 2-digit Pr. 160 setting is not displayed. However, it is displayed
when "0" is set in the first digit only.
4. When "9999" is set in Pr. 174 or Pr. 176, the parameters registered to the corresponding user
group is batch-deleted.
Pr. 162 to Pr. 165 % % Refer to Pr. 57.
% %
4.2.47 Watt-hour meter clear/actual operation hour meter clear
(Pr. 170, Pr. 171)
Pr. 170 "watt-hour meter clear"
Pr. 171 "actual operation hour meter clear"
You can clear the watt-hour value and actual operation hour monitoring function.
Parameter Factory
Number Setting
170 0
171 0
<Setting>
Write "0" in the parameters to clear the watt-hour value and actual operation hour.
REMARKS
The watt-hour value is monitored at the Pr. 52 setting of "25", and the actual operation hour at the Pr. 52
setting of "23".
Pr. 173 to Pr. 176 %

4.2.48 Input terminal function selection (Pr. 180 to Pr. 186)

Pr. 180 "RL terminal function selection"
Pr. 181 "RM terminal function selection"
Pr. 182 "RH terminal function selection"
Pr. 183 "RT terminal function selection"
Pr. 184 "AU terminal function selection"
Pr. 185 "JOG terminal function selection"
Pr. 186 "CS terminal function selection"
Use these parameters to select/change the input terminal functions.
Parameter Terminal
Number Symbol
180 RL
181 RM
182 RH
183 RT
184 AU
185 JOG
186 CS
Setting Range
0
0
% Refer to Pr. 160.
% %
Factory
Setting
0 Low-speed operation command (RL)
1 Middle-speed operation command (RM)
2 High-speed operation command (RH)
3 Second function selection (RT)
4 Current input selection (AU)
5 Jog operation selection (JOG)
Automatic restart after instantaneous
6
power failure selection (CS)
Pr. 52 "DU/PU main display data
Factory-Set Terminal Function
138
PARAMETERS
Related parameter
selection"
Setting Range
0 to 7, 10 to 14,
16, 17, 9999
(24 may also be set
for the NA and EC
versions only.)