Du/Pu Monitor Display Selection (Pr. 52, Pr. 54, Pr. 158, Pr. 170, Pr. 171, Pr. 268, Pr. 563, Pr. 564, Pr. 891); Du/Pu Monitor Display Selection - Mitsubishi FR-F720-00046-NA Instruction Manual

4.11.2 DU/PU monitor display selection

(Pr. 52, Pr. 54, Pr. 158, Pr. 170, Pr. 171, Pr. 268, Pr. 563, Pr. 564, Pr. 891)
The monitor to be displayed on the main screen of the operation panel (FR-DU07)/parameter unit (FR-PU04/FR-
PU07) can be selected. In addition, signals to be output from the terminal CA (analog current output) and AM
(analog voltage output) can be selected.
Parameter
Name
Number
52 *
DU/PU main display data
selection
54 *
CA terminal function
selection
158 *
AM terminal function
selection
170 Watt-hour meter clear
171 Operation hour meter clear
Monitor decimal digits
268 *
selection
Energization time
563
carrying-over times
Operating time carrying-
564
over times
Cumulative power monitor
891 *
digit shifted times
The above parameters can be set when Pr. 160 User group read selection = "0". (Refer to page 192)
* The above parameters allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in
Pr. 77 Parameter write selection.
...
Specifications differ according to the date assembled. Refer to page 399 to check the SERIAL number.
Monitor display and monitor output signal
Initial Value Setting Range
0, 5, 6, 8 to 14,
0
17, 20, 23 to 25,
(output
50 to 57, 64, 67,
frequency)
81 to 86 100
1 to 3, 5, 6,
8 to 14, 17, 21,
24, 50, 52, 53,
1
67, 70, 85
(output
1 to 3, 5, 6,
frequency)
8 to 14, 17, 21,
24, 50, 52, 53,
67, 70, 86
0
10
9999
9999
9999 0, 9999
0
9999 1
9999
0 to 65535
0
(reading only)
0 to 65535
0
(reading only)
0 to 4
9999
9999
Description
Select the monitor to be displayed on the
operation panel and parameter unit.
Refer to the following table for monitor description.
Select the monitor output to terminal CA.
Select the monitor output to terminal AM.
Set "0" to clear the watt-hour meter monitor.
Sets the maximum value for the monitoring from
communication to 9999kWh.
Sets the maximum value for the monitoring from
communication to 65535kWh.
Set "0" to clear the operation time monitor.
Setting "9999" has no effect.
Displayed as integral value.
Displayed in 0.1 increments.
No function
Displays the numbers of cumulative energization
time monitor exceeded 65535h. Reading only
Displays the numbers of operation time monitor
exceeded 65535h. Reading only
Set the number of times to shift the cumulative
power monitor digit.
Clamps the monitor value at maximum.
No shift
Clears the monitor value when it exceeds the
maximum value.
4
143