Horizontal Telescopic Top Flue Installation - Saunier Duval Themaclassic F30E SB Instructions For Use Installation And Servicing

The Horizontal Telescopic Top Flue,
Kit No. A2004500
Suitable for installations that require a flue length "L" from 430
minimum to 660 maximum.
extensions and bends are available, see note below.
If the flue length, see diagram 11.2. is less than 430 'L' Do Not
cut this flue but use the horizontal top flue 86285.
Note: Additional 1 metre extensions, 90° and 45° bends are
available. The maximum extended flue is 3.5m. The use of flue
bends requires the max extended flue lengths to be reduced by
1m. for 90° and 0.5m. for 45°.
11.1 Horizontal Telescopic Top Flue
Kit of parts, refer to diagram 11.1.
11.2 Horizontal telescopic flue system
Rear and side flue lengths and dimensions, see diagram 11.2.
Drill, Screw and
Tape (not supplied)
A
J
*
E
C
B
The flue kit A2004500 is 660 mm long and comprises:
- Telescopic flue assembly ..................................... A
- Fixing collar seal ..................................................... B
- Fixing collar ............................................................. C
- Elbow ....................................................................... D
- External rubber sealing collar ............................... E
- *Gasket .................................................................... F
- *Screws 6 off ........................................................... G
- *'O' rings .................................................................. H
- *Screws 4 off ............................................................ J
* supplied in plastic bag
Telescopic Top flue kit

11 Horizontal Telescopic Top Flue Installation

If longer flueing is required
D
H
*
F
H
*
Diagram 11.1
SIDE FLUE
G
*
*
REAR FLUE
23
L
70mm
225mm
450 mm
20mm
* refer to diagram 6.1
Min. Clearance
L
70mm
232 mm
65mm
Note :
Top of boiler
casing not
front panel
65mm
Note :
Top of boiler
casing not
front panel
Diagram 11.2
4000123924-2