Fixing Jig - Saunier Duval Themaclassic F30E SB Instructions For Use Installation And Servicing

The fixing jig is made up as follows:
A - Heating return fitting with isolating valve.
B (F30E and F35E Only) - Cold water inlet fitting with
isolating valve. The cold water inlet restrictor supplied
with boiler is fitted when the boiler is installed.
Refer to Section 9.
C - Heating flow fitting with isolating valve.
D (F30E and F35E Only) - Domestic hot water outlet.
E - Gas service cock.
F30E/F35E shown

7 Fixing jig

Other components within the fixing jig pack.
F - Hanging bracket
G - wall template
J - sealing washers and screws
17
Diagram 7.1
4000123924-2