Privacy Mask Setting; Mask Setting - Sanyo VCC-XZ400P Instruction Manual

PRIVACY MASK SETTING

This covers an area of the screen with a gray pattern for areas that may infringe on privacy.

MASK setting

1
In the MAIN MENU, use the CURSOR
button (j or l) to select SET for
PRIVACY MASK, then press the SET
button.
The PRIVACY MASK SETTING screen will
appear.
2
Use the CURSOR button (j or l) to
move the cursor to SET for MASK SET
and press the SET button.
The MASK NO. SELECT screen will appear.
Note: When PASSWORD LOCK is ON, moving
the cursor to MASK SET and press the
SET button to bring up a password
access screen. The password must be
entered in this screen.
3
Use the CURSOR button (j or l) to
move the cursor to a mask number (e.g.
MASK 3), and then use the CURSOR
button (d or c) to change the setting to
SET. Then press the SET button.
The MASK SET (POSITION) screen will
appear.
4
Use the CURSOR button (jldc) to
move the gray mask, then press the SET
button.
The SIZE screen will appear, and the mask
that was positioned in the POSITION screen
will be displayed.
5
Use the CURSOR button (jldc) to
adjust the size of the gray mask, then
press the SET button.
6
Move the cursor to BACK for MENU and
press the SET button.
It is possible to set as many as 4 masks on
the same POSITION screen.
To return the settings in this screen to their
defaults, change PRESET to ON and then
press the SET button.
To close the menu screen or return to the
previous screen, select BACK or END for
MENU and press the SET button.
15