Advertisement
16
Remove the three #8-32x3/8" screws and 4mm lock washers (pre-assembled to the valve bracket) from
the sideburner valve bracket. Position sideburner valve bracket beneath sideburner shelf fascia so that
valve stem comes through larger center hole in fascia. Align the lower hole on valve bracket with the
lower hole on fascia. Secure using one #8-32x3/8" screw and 4mm lock washer, removed previously.
Place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel and holes on
fascia with holes on valve bracket, making sure " OFF" is on the top of bezel. Secure using the remaining
two #8-32x3/8" screws and 4mm lock washers, shown A.
Press sideburner control knob onto valve stem, shown B.
A
#8-32x3/8"
B
24 • 464224011
#8-32x3/8" screw
Qty.3
screw
4mm lock
washer
#8-32x3/8"
screw
Control knob
4mm lock washer
Qty.3
Valve stem
4mm lock
Valve bracket
washer
Valve stem
Advertisement
