Advertisement
14
Attach two 1/4-20x5/8" screws, 7mm lock washers and 7mm flat washers on right side of fire box,
shown A. Only tighten one-fourth of screw length, so that mounting panel of shelf can slide between fire
box and washers in next step. Do not fully tighten the screws.
Insert the keyhole slots on mounting panel of burner shelf over the two screws and washers. Make sure
the tabs on shelf mounting panel insert into cut-outs on fire box, shown B. Fully tighten the two screws.
1/4-20x5/8" Screw
Qty.2
A
B
22 • 464224011
7mm lock washer
Qty.2
1/4-20x5/8"
screw
panel
Tabs into cut-outs
7mm Flat washer
Qty.2
7mm flat
washer
7mm lock
washer
Keyhole slot over the
screw and washer
Advertisement
