Unpacking Your Fan - Regency Ceiling Fans Regulator Owner's Manual

U Y
NPACKING OUR
1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever
necessary, the fan should be returned in original packing. Remove all parts and hardware. Do not lay motor
housing on its side, or the decorative housing may shift, be bent or damaged.
2. Examine all parts. You should have the following:
1. Fan blades (5)
2. Mounting bracket
3. Hanging bracket
4. Ceiling canopy
5. Canopy screw cover plate
6. Downrod/ball assembly
7. Decorative collar cover
8. Fan housing with motor (Remove and discard rubber shipping supports around motor, if included on your fan.
Save screws.)
9. Blade arms (5)
10. Detachable switch housing mounting plate
11. Detachable switch housing
12. Pull chain with fob
13. Bracket mounting hardware (wood screws, screws, lock washers, washers, wire nuts)
14. Blade to blade arm screws, w/washers (20)
NOTE: NOTE: Design of parts shown above may look slightly different for your specific model of fan.
F
AN
1
2
3
4
5
6
7
3
3
8
9
10
11
12
13
14