Error Messages - Pioneer AVIC-X1BT Operation Manual

Message
This function is not available with the
current map disc.
Failed to save to memory. Please re-
enter setting.

Error Messages

When problems occur with disc playback, an error message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action. If the error persists, contact
your dealer or your nearest PIONEER Service Centre.
The messages in "( )" will appear on the sub-display.
Message
Error-02
(ERROR-20, ERROR-
21, ERROR-22)
Error-05-82
(ERROR-50)
DIFFERENT REGION
DISC (REGION ERR)
NON PLAYABLE DISC
(NON-PLAY)
THERMAL PROTEC-
TION IN MOTION
(TEMP)
When
The current position is "areas not
stored on the map disc (unrecorded
areas)" and an attempt was made to
zoom in to make the scale 500 m or
more.
The settings could not be saved for
some reason.
Cause
Dirty
Scratched disc
The disc is loaded upside down
Electrical or mechanical
The disc does not have the same region
number as the navigation system
This type of disc cannot be played by the
navigation system
The temperature of the navigation system is
outside of the normal operating range
What to do
Zoom in again after the vehicle
moves into an area stored on the
map disc.
Or, replace the map disc and try to
zoom in again.
• Retry.
• Consult the Pioneer Local dealer if
this message persists.
Action (See)
Clean disc.
Replace disc.
Check that the disc is loaded correctly.
Press the RESET button. ("Hardware man-
ual" and refer to page 130 in this manual.)
Replace the DVD-Video with one bearing the
correct region number.
Replace the disc with one the navigation sys-
tem can play.
Wait until the unit's temperature returns to
within normal operating limits.
139