Advertisement
AVIC-Z150BH, AVIC-X950BH, AVIC-X850BT Firmware Update Version
1.06 (January 2014)
This firmware update applies only to AVIC-Z150BH, AVIC-X950BH, and AVIC-X850BT In-Dash
Navigation units sold in the United States and Canada and resolves the following:
Fixes Pandora connectivity issues when the Pioneer In-Dash Navigation unit is connected to an
iPhone running iOS7.
Provides audible incoming call notification even when the Beep Volume has been turned off.
In order to perform this update, the following items are needed:
Pioneer In-Dash Navigation unit: AVIC-Z150BH, AVIC-X950BH, or AVIC-X850BT
SD Card (for AVIC-Z150BH) or MicroSD Card (for AVIC-X950BH and AVIC-X850BT)
The following preparatory steps must first be undertaken in order to complete the firmware update:
A. Download the firmware update file
B. Update the firmware on your Pioneer Navigation
C. Confirm the updated firmware version
A. Downloading the firmware update file
IMPORTANT
Please download and print these AVIC-Z150BH, AVIC-X950BH, and AVIC-X850BT Firmware Update
instructions before downloading and installing the firmware update. It is very important that you
complete all steps correctly and in the order described below.
WARNING! This firmware update applies only to AVIC-Z150BH, AVIC-X950BH, or AVIC-X850BT
In-Dash Navigation units sold in the United States and Canada.
Note: If you have any questions, please contact Pioneer Customer Service toll free at
1-800-421-1404. Pioneer service representatives are available Monday through Friday, 10:30
AM - 2:30 PM and 3:30 PM - 7:00 PM (Eastern Time), except on holidays.
Procedure
1. Download the firmware update file from the Pioneer Electronics website.
http://www........................................................................
2. Locate and decompress the downloaded file.
The downloaded file will produce a folder called
If you do not have a file decompression utility installed on your computer, you may download WinZip at
http://www.winzip.com
(purchase may be required).
"AVICX850"
when decompressed.
En
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pioneer VIC-Z150BH
Summary of Contents for Pioneer VIC-Z150BH
- Page 1 This firmware update applies only to AVIC-Z150BH, AVIC-X950BH, and AVIC-X850BT In-Dash Navigation units sold in the United States and Canada and resolves the following: Fixes Pandora connectivity issues when the Pioneer In-Dash Navigation unit is connected to an iPhone running iOS7.
- Page 2 ― 256 MB or larger in capacity, formatted to FAT32 ― Should be blank (should not contain any files) While the Pioneer In-Dash Navigation unit is being updated, DO NOT turn off the system’s power. DO NOT remove the (micro)SD Card during the firmware update process.
- Page 3 (top) folder of the (micro)SD Card. There should be no other files within the (micro)SD Card. 2. Turn your vehicle’s key to the ON position and power up the Pioneer In-Dash Navigation unit. 3. Insert the (micro)SD Card into the Pioneer In-Dash Navigation unit: ‧...
- Page 4 If the Application Version shows 1.06, the firmware update has been properly applied and no further steps are necessary. 5. Press the Back button to exit the Service Information screen and return to the main menu. Your Pioneer In-Dash Navigation Unit is now ready for use. © 2014 PIONEER CORPORATION.
Need help?
Do you have a question about the VIC-Z150BH and is the answer not in the manual?
Questions and answers