Checking The Entire Route Overview; Checking The Set Route From The Shortcut Menu; Recalculating The Route To Your Destination; Recalculating The Route To The Destination Using The Route Options Menu - Pioneer AVIC-X1BT Operation Manual

4
Touch "Back".
You can return to the previous display.
❒ When a long distance route is calculated,
your navigation system may not be able to
list all the roads. (In this case, the remain-
ing roads will be shown in the list as you
drive on.)
Checking the entire route over-
view
You can check the entire shape of the current
route.
❒ When View Current Route is selected dur-
ing the memory navi mode, the information is
displayed up to the location where the route is
in the memory.
1
After touching "Route Options" in the
main menu, touch "View Current Route".
❒ "View Current Route" is displayed only
when the route is set.
❒ You can also see the destination by touch-
ing on the right of the list.
2
Touch "Overview".
A map of the whole route up to the destination
is displayed.
❒ You can also check the overview by using
the shortcut menu if "Whole Route Over-
view" is selected on the "Short-Cut
Selection".
Checking the set route from the
shortcut menu
You can also check the information about the set
route from the shortcut menu.
1
Touch the map screen.
The Shortcut menu appears.
2
Touch .
The Route/Detour menu appears.
3
Touch "Route Profile" or "Route Scroll".
➲ "Route Profile" ➞ Page 35 (Step 3)
➲ "Route Scroll" ➞ Page 35 (Step 3 and 4)
4
Touch "Back".
You can return to the previous display.
36
Recalculating the Route to Your
Destination
You can set the length of the area, avoid just a
certain area, or you can even search a new route
from the current location to your destination. (On
the map screen during route guidance, try the fol-
lowing operations.)
Recalculating the route to the
destination using the Route
Options menu
1
Touch "Route Options" in the Main menu,
and then touch "Recalculate".
Automatically searches the route to the desti-
nation again.
❒ "Recalculate" is displayed only when the
route is set.
❒ You can also recalculate (reroute) your
route using the
shortcut menu.
Recalculating a specified dis-
tance in the route ahead of your
current position
1
Touch the map screen.
The Shortcut menu appears.
2
Touch .
The Route/Detour menu appears.
3
Touch the distance from the list.
Detour distance
Searches detours for a specified distance in
the route ahead of your current position. After
the route is calculated, the map screen shows
your surroundings and route guidance is
resumed.
Chg.Route in the