How To Move The Incline Trainer - NordicTrack Incline Trainer X7i Treadmill Manual

HOW TO MOVE THE INCLINE TRAINER

Before moving the incline trainer, insert the key into the
console, raise the incline to the maximum incline level,
Console
remove the key, and unplug the power cord.
Due to the size and weight of the incline trainer, moving
Belly
it requires two or three persons. Hold the uprights firmly
Pan
near the console. Tip the incline trainer forward until it rolls
freely on the wheels. CAUTION: To decrease the possibil-
Upright
ity of injury or of damage to the incline trainer, do not
lift the incline trainer by the plastic belly pan. Do not
pull on the console.
Carefully roll the incline trainer on the wheels to the desired
location, and then lower it to the level position. CAUTION:
To reduce the risk of injury, use extreme caution while
Wheel
moving the incline trainer. Do not attempt to move the
incline trainer over uneven surfaces.
Make sure that the incline trainer rests firmly on the floor. If
the incline trainer rocks even slightly, turn the Leveling Feet
(15) as needed until the rocking motion is eliminated.
15 15
25