Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork; Handlebar Position - KTM 2014 Freeride 250 R Owner's Manual

11 TUNING THE CHASSIS
11.12

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
11.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
11.14

Handlebar position

0 0
–
Remove protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
B01033-10
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
B01728-10
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar supports are placed at a distance of
Hole distance
The handlebar supports can be mounted in four different positions.
B01035-10
.
1
clockwise all the way.
2
are located at the bottom end of the fork legs.
2
.
1
clockwise all the way.
1
are located at the top end of the fork legs.
1
15 mm (0.59 in)
A
3.5 mm (0.138 in)
B
25 clicks
20 clicks
15 clicks
25 clicks
20 clicks
15 clicks
to each other.
A
from the center.
B
35