Getting started
Names and Functions of Main Parts
Unit Configuration
This unit consists of the camera body, middle ring portion and rear cover.
Camera body
≥ Detaching and attaching the Rear Cover (l 11)
≥ Detaching and attaching the Middle Ring Portion (l 12)
≥ The middle ring portion has a front and rear orientation. Take note of the front and rear
orientation when attaching the middle ring portion or passing cables through. ( l 12 , 20 )
Names and Functions of Main Parts
1
2
3
4
1
Internal stereo microphones
2
Lens
3
Status display lamp
jOrange light: Standby mode
jGreen light: The unit is turned on
jFlashing green light:
The unit is receiving a wireless remote
control signal with a matching remote
control ID
jFlashing orange light:
The unit is receiving a wireless remote
control signal with a different remote
control ID
4
Tally lamp
5
Wireless remote control signal
light-sensing area (l 45)
6
Perpendicular fixing screw (l 10)
7
Horizontal fixing screw (l 10, 23)
8
VQT4N15
Middle ring portion
6
5
7
8
8
9
10 Anti-theft wire mounting hole (l 20)
The anti-theft wire (available from a
hardware store) is attached here.
Rear cover
Stand mounting hole (l 10, 23)
Bundling band eyelet (l 20)
9
10