Panasonic AW-HE2P Operating Instructions Manual page 39

3
Click the MAC address/IPv4 address of the camera to be set, and
click the [Network settings] button.
≥ When a DHCP server is being used, the IP address allocated to the unit can be checked by
clicking the [Search] button of the Easy IP Setup Software.
≥ If IP addresses have been duplicated, the duplicated camera No. is displayed in the [IPv4
overlap] column of the relevant camera.
≥ Clicking [Access Camera] displays a Live screen of the selected camera.
≥ The IPv4/IPv6 switching function cannot be used with this camera (only compatible with
IPv4).
4
Input the network items, and click the [Save] button.
≥ When a DHCP server is being used, [DNS] of the Easy IP Setup Software can be set to
[Auto].
≥ This camera is not compatible with the [AutoIP] connection mode.
≥ After the [Save] button is clicked, it takes about 2 minutes for the settings in the unit to be
completed.
If the AC adaptor or LAN cable is disconnected before the settings are completed, the
settings will be canceled. In this case, repeat the steps to establish the settings.
≥ When a firewall (including software) has been introduced, enable access to all the UDP
ports.
39
VQT4N15