Panasonic AW-HE2P Operating Instructions Manual page 20

2
Pass each cable through the rear cover and the middle ring portion
and connect them to the rear of the camera body.
≥ Pass cables from the side with the middle ring portion groove (A).
A
B M3 screw (supplied)
Tightening torque: 0.882 N·m (9 k
C Flat washer (for M3 screw, supplied)
D Drop-prevention wire (supplied)
E AC adaptor (supplied)
F LAN cable (l 9)
G HDMI cable (optional)
H USB cable (optional)
≥ Connect this when supplying power from the USB cable.
≥ Insert with the mark
3
Attach the middle ring portion and the rear cover. (l 11, 12)
Check that the top and bottom of the middle ring portion are in a position which
suits the installation method. (l 13)
4
Connect the anti-theft wire.
≥ As necessary for use, pass the bundling band through the bundling band eyelet and bind
the cables together.
20
VQT4N15
LAN
g
f·cm)
on the cable facing upwards.