NordicTrack C 1750 Pro Treadmill Manual page 12

8. Attach the upper end of the Storage Latch (58)
to the Frame (55) with a 3/8" x 1 3/4" Bolt (8)
and a 3/8" Nut (7). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL FOR USE on page 28).
9. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 30).
10. IMPORTANT: See page 14 and plug in the
power cord. Next, see page 16 and turn on
the power.
Press the 1 Step Incline/Decline button num-
bered -3. This will calibrate the incline system.
Then, adjust the incline to the level desired.
IMPORTANT: To avoid damaging the treadmill,
adjust the incline to zero percent before you
fold the treadmill.
8
10
IMPORTANT:
Make sure to follow
all instructions in
this step
12
7
55
8
58