To Cancel The Timer; Power Outage - GE 164D2966P126 Use And Care Manual

OVEN CONTROL, CLOCK Am TMER
functions to work properly. The time of day cannot be
changed during a Timed Baking or Self-Cleaning cycle.
operations. The maximum setting
on the timer is 9 hours and 55
minutes.
To Reset the Timer
If "TIMER" is displayed, press the INCREASE or
DECREASE pad until desired time is reached.
If "TIMER" is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions above
The end of cycle tone is a series of three beeps
followed by one beep every six seconds. [f you would
like to remove the signal that beeps every six seconds,
press and hold the CLEAR/OFF uad for 1() seconds.
To Set the Clock
CLOCK
A
3. Press the CLOCK pad to start.
To Set the Timer
1. Press the TIMER
ON/OFF pad.
TIMER
ON/OFF
A
2. Press the
INCREASE or
DECREASE pad to
set the amount of
time on the timer.

To Cancel the Timer

Press ;nd hold the TIMER ON/OFF pad until the
word "TIMER" disappears from the display.

Power Outage

After a power outage, when power is restored, the
display will flash and time shown will no longer be
correct-for example, after a 5-minute power
interruption the clock will be 5 minutes slow.
The display flashes until the clock is reset. All other
functions that were in operation when the power went
out will have to be programmed again.
1. Press the CLOCK pad.
2. Press the INCREASE or DECREASE
pad to set the time of day.
The timer will start automatically
within a few seconds of releasing the
INCREASE or DECREASE pad. The
timer, as you are setting it, will display
seconds until one minute is reached.
Then it will display minutes and
seconds until 60 minutes is reached.
After 60 minutes, it will display hours
minutes until the maximum time of
9 hours and 55 minutes is reached.