Microtek FileScan 3125c Start Here Manual page 5

Position Documents (Cont.)
To Load Cards
1. Slide the Guide Arms toward the center of
the feed tray and free up the enough space
to put the Card Holder.
2. To install the Card Holder into the feed tray,
with its front side up, slide the Card Holder
along the sides of the Guide Arms down
until it completely hangs on the arms.
After installed, there will be a slot hollow
space between the Card Holder and the
Document Feed Tray for loading the card.
3. Insert the card into the slot hollow space
between the Card Holder the feed tray until
it meets resistance, with the side to be
scanned facing up and the top edge facing
toward the feeder.
NOTE: When scanning a card, you have to choose
ADF (Duplex) in the Scan Source drop-down menu
as your image input device; otherwise, it may cause
incorrect or unwanted results for your scanned
images.
Guide Arms
5
Card Holder